1 July 2006 Fabrication and tolerance reduction of a Si-based pickup module for optical storage
Author Affiliations +
We develop a miniaturized optical signal pickup module, with a working wavelength of 650 nm, and an image numerical aperture (NA) of 0.6, comprised of several SiNX optical phase elements on stacked Si substrates, for use in optical storage systems. The optical module, which is optical-on-axis and transmissible in both visible and infrared ranges, is designed to include not only a light source, but also diffractive optical elements (DOEs), which can be made with micro-optoelectromechanical systems (MOEMS) technology. Its optical operation is simulated by ray tracing to optimize the spot size (~0.6 µm) focused on the disk by adjusting the tolerance of each element in the alignment. All the Si-based transmission optical elements are fabricated and stacked by self-alignment bonding to reduce the tolerance of the assembled system. We obtain a circular focused spot when the full-width at half maximum (FWHM) of the zero-order beam is 3.1 µm; the diffraction limited spot size on the optical disk is 0.7 µm.
© (2006) Society of Photo-Optical Instrumentation Engineers (SPIE)
Chien Chieh Lee, Chih-Ming Wang, S. K. Huang, Jenq-Yang Chang, Gou Chung Chi, S. C. Shu, and ChengYi Liu "Fabrication and tolerance reduction of a Si-based pickup module for optical storage," Optical Engineering 45(7), 074601 (1 July 2006). https://doi.org/10.1117/1.2219105
Published: 1 July 2006


Recent improvements to optical disk drive technology
Proceedings of SPIE (September 02 1996)
Holographic elements used in optical heads
Proceedings of SPIE (August 12 1993)
Micro-optical element on SiN membrane
Proceedings of SPIE (November 02 2003)
Dual focus optical head for 0.6 mm and 1.2 mm...
Proceedings of SPIE (October 11 1994)

Back to Top