1 January 2007 Polarization-insensitive dichroic filter for automatic optical inspection of printed circuit boards
Author Affiliations +
Optical Engineering, 46(1), 013801 (2007). doi:10.1117/1.2424918
Abstract
A polarization-insensitive dichroic filter was designed and fabricated at an angle of 45 deg with a slope of 13.0 and an average transmittance of 96.41% for a wavelength range about 300 nm for use in the automatic optical inspection (AOI) of a printed circuit board. The filter supports the inspection of PCBs with a high signal-to-noise ratio. The AOI had a resolution of 25.39 line pairs/mm in the tangential and sagittal directions.
YaPing Li, Cheng-Chung Lee, "Polarization-insensitive dichroic filter for automatic optical inspection of printed circuit boards," Optical Engineering 46(1), 013801 (1 January 2007). http://dx.doi.org/10.1117/1.2424918
JOURNAL ARTICLE
6 PAGES


SHARE
KEYWORDS
Optical filters

Electronic filtering

Signal to noise ratio

Transmittance

Optical inspection

Dielectric filters

Luminescence

Back to Top