1 January 2007 Multiwavelength fiber laser based on semiconductor optical amplifier and few-mode fiber gratings
Author Affiliations +
We propose a simple semiconductor optical amplifier–based fiber laser configuration for achieving multiwavelength oscillation at room temperature, in which a few-mode fiber Bragg grating was used as the wavelength-selective component. An amplitude variation of 0.8 dB over a 180-sec period was obtained for triple-wavelength oscillation at room temperature, which is more stable than that of erbium doped fiber (EDF)–based fiber laser with similar configuration. This multiwavelength laser can be switched between dual- and triple-wavelength operations by properly adjusting the polarization controller in the cavity. The lasing wavelength could be effectively tuned using the thermal heating method, and the output power variation was very small compared with that of the EDF-based fiber laser. This multiwavelength laser has the advantage of simple configuration, good stability, and wavelength tuning with small output power variation.
© (2007) Society of Photo-Optical Instrumentation Engineers (SPIE)
Dae Seung Moon, Dae Seung Moon, Youngjoo Chung, Youngjoo Chung, Young-Geun Han, Young-Geun Han, } "Multiwavelength fiber laser based on semiconductor optical amplifier and few-mode fiber gratings," Optical Engineering 46(1), 014202 (1 January 2007). https://doi.org/10.1117/1.2431357 . Submission:


High-power pulsed fiber source at 1567 nm
Proceedings of SPIE (April 21 2005)

Back to Top