1 December 2007 Design and analysis of an asymmetrical liquid-filled lens
Author Affiliations +
Optical Engineering, 46(12), 123002 (2007). doi:10.1117/1.2821426
Abstract
The purpose of this study is to design and analyze a new asymmetrical liquid-filled lens. By controlling the tilt angle of the pressure ring and the hydraulic pressure of this lens, either the light direction or the focal length can be changed. For this study, the ANSYS workbench program is employed to analyze the membrane deformation of the lens under different liquid pressures and asymmetrical conditions. ZEMAX is used to compute its effective focal length. To demonstrate the feasibility of the asymmetrical lens, a prototype is developed and tested. The analysis and experimental results show good agreement.
Dein Shaw, Chih-Wei Lin, "Design and analysis of an asymmetrical liquid-filled lens," Optical Engineering 46(12), 123002 (1 December 2007). https://doi.org/10.1117/1.2821426
JOURNAL ARTICLE
8 PAGES


SHARE
RELATED CONTENT


Back to Top