1 December 2007 Two liquid crystal on silicon panel projector with efficient light-emitting diode illumination engine
Author Affiliations +
Optical Engineering, 46(12), 124002 (2007). doi:10.1117/1.2822392
Abstract
LED-based projectors have numerous advantages compared to traditional projectors. They are more compact, they exhibit a larger color gamut and a longer lifetime, the supply voltage is lower and they can even operate on batteries. LEDs can switch rapidly (possibility to pulse) and they have a high dimming ratio (contrast considerations). However, they have low optical power per étendue, although this is also improving consistently. With an efficient illumination engine design we can build an LED projector with a moderate light output and with superior properties. We present a relatively compact LED projector with two liquid crystal on silicon (LCOS) light valves (LVs). One of these LVs alternately modulates red and blue information, while the other permanently modulates green information to achieve a good color balance. Additionally, we apply some methods to increase the brightness on the screen. Our two-LCOS approach results in a compact, efficient LED projector that produces 171 lm projected D65 flux.
Hüseyin Murat, Dieter Cuypers, Herbert De Smet, Youri Meuret, Bart Van Giel, Lawrence P. Bogaert, Hugo Thienpont, "Two liquid crystal on silicon panel projector with efficient light-emitting diode illumination engine," Optical Engineering 46(12), 124002 (1 December 2007). http://dx.doi.org/10.1117/1.2822392
JOURNAL ARTICLE
6 PAGES


SHARE
KEYWORDS
Projection systems

Light emitting diodes

Liquid crystal on silicon

Polarization

Light valves

Modulation

Green light emitting diodes

Back to Top