1 February 2007 Measurement of a 2-meter flat using a pentaprism scanning system
Author Affiliations +
Optical Engineering, 46(2), 023602 (2007). doi:10.1117/1.2700386
Abstract
Precise manufacturing of optical flats requires precise characterization of the surface. A scanning pentaprism system is ideal for use as an absolute and precise test for an optical flat. Such a system was built and used to test a 2-m diameter flat mirror. This system uses light from an autocollimator that is reflected from two pentaprisms to project reference beams of light onto the flat mirror. The light reflected from the mirror back through the pentaprisms provides information on low order optical aberrations in the flat mirror. We report results of the test on a 2-m flat, characterizing the errors and their sources. There is enormous potential for our system to be used to test larger flats and even curved surfaces, made of either a glass or a liquid.
Proteep C. V. Mallik, Chunyu Zhao, James H. Burge, "Measurement of a 2-meter flat using a pentaprism scanning system," Optical Engineering 46(2), 023602 (1 February 2007). https://doi.org/10.1117/1.2700386
JOURNAL ARTICLE
9 PAGES


SHARE
RELATED CONTENT

Scanning systems for IR sensors
Proceedings of SPIE (August 23 1996)
Scanning pentaprism measurements of off-axis aspherics
Proceedings of SPIE (July 25 2008)
Scanning pentaprism measurements of off-axis aspherics II
Proceedings of SPIE (August 21 2009)

Back to Top