1 February 2007 Repetition rate control in continuous-wave-pumped, passively Q-switched solid-state lasers
Author Affiliations +
Abstract
We describe a technique for the adjustment and control of repetition rates in continuous-wave-pumped, passively Q-switched solid-state lasers. The method uses a movable intracavity lens to modify the mode matching and hence the gain of the laser beam per pass. The technique was applied to a diode-pumped Nd3+:YVO4 laser passively Q-switched with a Cr4+:YAG saturable absorber at 1064 nm. At a fixed pump power of 5.4 W, we were able to continuously adjust the repetition rate between 13.8 and 25 kHz by translating an intracavity converging lens. We also demonstrate that by adjusting the lens position, the repetition rate can be kept at a desired value as the pump power varies. In particular, as the pump power was increased from 3.95 to 5.9 W, the lens position was varied by 0.91 cm to keep the repetition rate constant at 13.8 kHz. Rate-equation formalism was used to investigate the variation of the repetition rate as a function of lens position, and very good agreement was obtained between experiment and theory.
Alphan Sennaroglu, Huseyin Cankaya, Adnan Kurt, "Repetition rate control in continuous-wave-pumped, passively Q-switched solid-state lasers," Optical Engineering 46(2), 024201 (1 February 2007). https://doi.org/10.1117/1.2709857
JOURNAL ARTICLE
4 PAGES


SHARE
RELATED CONTENT

A compact solid state laser
Proceedings of SPIE (March 16 2016)
Nd YAG V YAG microchip laser generating 1 ns long...
Proceedings of SPIE (May 19 2010)
Diode pumped thin slab solid-state lasers
Proceedings of SPIE (February 18 2009)
Side pumped neodymium slab lasers Q switched by V YAG...
Proceedings of SPIE (February 28 2006)

Back to Top