1 June 2007 Integration of precisely aligned lenslet arrays with waveguide arrays
Author Affiliations +
Abstract
We present a method to fabricate in situ lens arrays on the edge of waveguide arrays that are embedded in a printed circuit board. This fabrication method can guarantee precise alignment between the lenslet and the waveguide arrays, by directly overlaying the lenslet pattern on the waveguide cores. Each fabricated lenslet has a numerical aperture of 0.1, and the beam through it has a divergence angle of 3.29 deg, close to that of a perfectly aligned commercial lenslet array.
© (2007) Society of Photo-Optical Instrumentation Engineers (SPIE)
Deqiang Song, Deqiang Song, Doug Jorgesen, Doug Jorgesen, Matthias Gross, Matthias Gross, Sadik C. Esener, Sadik C. Esener, } "Integration of precisely aligned lenslet arrays with waveguide arrays," Optical Engineering 46(6), 065401 (1 June 2007). https://doi.org/10.1117/1.2743984 . Submission:
JOURNAL ARTICLE
4 PAGES


SHARE
RELATED CONTENT

Design of a waveguide with optics axes tilted by 45°...
Proceedings of SPIE (March 01 2016)
The Paths To Subhalf-Micrometer Optical Lithography
Proceedings of SPIE (January 01 1988)
A New Step By Step Aligner For Very Large Scale...
Proceedings of SPIE (September 05 1980)
Interlayer self-aligning process for 22nm logic
Proceedings of SPIE (March 03 2010)

Back to Top