1 January 2008 Error correction method in radial runout measurements based on laser autocollimation
Author Affiliations +
Optical Engineering, 47(1), 013602 (2008). doi:10.1117/1.2827521
Abstract
Radial runout measurement on a spindle, based on laser autocollimation, is susceptible to reflection surface irregularities because an irregularity occurring in the reflected laser beam rotates with the spin of the reflection target. This, study proposes an error correction method for the influences of reflection surface irregularities by applying the three-point method, which separates the radial runout of the spindle and the out-of-roundness of the reference cylinder attached to the spindle by using three displacement sensors. The principle of the proposed method is described, and its validity is confirmed in a computer simulation and experiment.
Kengo Fujimaki, Kimiyuki Mitsui, "Error correction method in radial runout measurements based on laser autocollimation," Optical Engineering 47(1), 013602 (1 January 2008). https://doi.org/10.1117/1.2827521
JOURNAL ARTICLE
5 PAGES


SHARE
Back to Top