1 March 2008 Multiscale contour matching with basis functions
Author Affiliations +
A multiscale contour matching method using basis functions is presented. In this scheme, curves are parametrized by the curve length s and s′, and contours are matched by finding a matching function s′=f(s). A set of basis functions, which are monotonic and continuous in the interval [0,1], are designed. The sum of these weighted basis functions approximates f(s). The weight of each function can be computed through optimization of the objective function. Multiscale schemes can make matching insensitive to initial value. Experimental validation is carried out with a sequence of human active contours and the result shows this method is effective.
© (2008) Society of Photo-Optical Instrumentation Engineers (SPIE)
Di Wu, Di Wu, Wenjun Zhang, Wenjun Zhang, } "Multiscale contour matching with basis functions," Optical Engineering 47(3), 037009 (1 March 2008). https://doi.org/10.1117/1.2898586 . Submission:


Progressive Presentation Of Transformed Images
Proceedings of SPIE (April 04 1989)
A Rate Distortion Analysis Of Adaptive Hybrid Picture Coding
Proceedings of SPIE (December 06 1978)
Low Bit Rate Image Coding Based On Evaluation Of Motion...
Proceedings of SPIE (January 29 1990)

Back to Top