1 June 2008 Effect of input polarization states on the error of polarization measurement
Author Affiliations +
Optical Engineering, 47(6), 065007 (2008). doi:10.1117/1.2947072
For measurements of the Mueller matrix and other polarization effect matrices in a birefringent optical system, such as an optical fiber, we demonstrate by theoretical analysis and simulation that two input polarization states that are mutually orthogonal in Stokes space statistically have the maximum probability to achieve the optimum measurement accuracy. But in a single test, evident deviation from perpendicularity can be observed for achieving the minimum measurement error. For measurements of both polarization effect matrices and polarization effect vectors, we find that all measurement errors have a bathtub-shaped relationship with the angle between two input polarization states in the range from 0 to 180 deg. This means a limited offset from perpendicularity will only slightly and statistically increase the measurement error in a single test.
Hui Dong, Ping Shum, "Effect of input polarization states on the error of polarization measurement," Optical Engineering 47(6), 065007 (1 June 2008). http://dx.doi.org/10.1117/1.2947072


Error analysis

Optical engineering


Optical fibers

Statistical analysis

Analytical research

Back to Top