1 November 2009 Projector calibration from the camera image point of view
Xu Zhang, Limin Zhu
Author Affiliations +
Abstract
The traditional projector calibration always assumes that the reprojection errors on the projector image are independent and identically distributed and utilize the same method as the camera calibration. Actually, even if the measured points on the camera image are independent and identically distributed Gaussian variables, it is impossible to obtain the statistical characteristics of the reprojection errors on the projector image, because the relation between the original measurement error and the reprojection error is nonlinear. We propose a method to estimate the projector parameters according to the camera image reprojection error. It does not require us to know the statistical characteristics of the projector image point and makes full use of the background knowledge of the camera image noise, because our cost function does not concern the reprojection error on the projector image as is the case in the traditional method. The simulations and experiments affirm that this method has higher precision, even if the real noise is not normal.
©(2009) Society of Photo-Optical Instrumentation Engineers (SPIE)
Xu Zhang and Limin Zhu "Projector calibration from the camera image point of view," Optical Engineering 48(11), 117208 (1 November 2009). https://doi.org/10.1117/1.3265551
Published: 1 November 2009
Lens.org Logo
CITATIONS
Cited by 36 scholarly publications and 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Projection systems

Cameras

Calibration

3D modeling

Error analysis

Content addressable memory

Laser sintering

RELATED CONTENT

Low-cost structured-light based 3D capture system design
Proceedings of SPIE (March 06 2014)
Measurement error analysis of the 3D four-wheel aligner
Proceedings of SPIE (October 10 2013)
A measurement error evaluation method of videometrics
Proceedings of SPIE (August 18 2011)
Accurate 3D measurement using a structured light system
Proceedings of SPIE (January 20 1997)
A new planar pattern for camera calibration
Proceedings of SPIE (September 24 2011)

Back to Top