1 December 2009 Refractive index control in bicomponent polymer films for integrated thermo-optical applications
Author Affiliations +
Abstract
Optical properties of transparent polymer thin films, produced by spin-coating on silicon and constituted of polycarbonate (PC), poly(methyl methacrylate) (PMMA), and PC/PMMA, were investigated with regard to integrated thermo-optical (TO) device applications. Refractive index dependences on wavelength, temperature, and film composition were measured by spectroscopic ellipsometry with a dedicated autocontrolled heater setup, in the ranges of 400 to 800 nm, 25 to 85 °C and 0 to 100 wt % PC, respectively, with determination of Cauchy and Lorentz-Lorenz parameters. Within these intervals, thermomechanical compatibility and pronounced index contrast of around 0.12 between PC and PMMA, as well as their TO coefficients one order of magnitude higher than that of silica, allow convenient tailoring for specific TO requirements. In addition, wide-range fine-tuning of refractive index variation is found to be facilitated by the weak dependence of isothermal dispersion curves and TO coefficients on film composition.
© (2009) Society of Photo-Optical Instrumentation Engineers (SPIE)
Paulo Azevedo Soave, Ronaldo André Ferreira Dau, Marcia Regina Becker, Marcelo Barbalho Pereira, Flavio Horowitz, "Refractive index control in bicomponent polymer films for integrated thermo-optical applications," Optical Engineering 48(12), 124603 (1 December 2009). https://doi.org/10.1117/1.3275452 . Submission:
JOURNAL ARTICLE
6 PAGES


SHARE
Back to Top