1 August 2010 Writing wide bandwidth nonchirped fiber Bragg gratings with high sidelobe suppression ratio by linearly scaling apodization
Yunfei Zhao, Rujie Hou, Changhun Zhou
Author Affiliations +
Abstract
A linearly scaling optical apodization method for laser beam power profile modulation is induced. Changing an amplitude mask position between the beam-focusing cylindrical lens and the fiber can linearly scale the vertical apodization profile; this, in turn, enables the optimization of the grating apodization. By using this method, an apodized fiber Bragg grating (FBG) that is designed as an uncooled pump laser diode stabilizer with the specifications of 4.5% reflectivity, 1.6 nm bandwidth, and the side-lobe suppression ratio (SLSR) of 30 dB was UV-imprinted with a tiny Gaussian amplitude mask. Using the same apodization method, a nonchirped-type FBG edge filter was written with a very smooth spectrum. The grating specifications of 0.5-dB attenuation bandwidth of 3.6 nm and 96.5% reflectivity were achieved. The half-spectrum ascending bandwidth in the longer wavelength side is 2.2 nm with 27-dB SLSR. The linearly scaling apodization method is highly beneficial for optimizing the apodization process of UV-writing shorter FBGs with strong apodization.
©(2010) Society of Photo-Optical Instrumentation Engineers (SPIE)
Yunfei Zhao, Rujie Hou, and Changhun Zhou "Writing wide bandwidth nonchirped fiber Bragg gratings with high sidelobe suppression ratio by linearly scaling apodization," Optical Engineering 49(8), 085001 (1 August 2010). https://doi.org/10.1117/1.3475947
Published: 1 August 2010
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Apodization

Fiber Bragg gratings

Optical filters

Reflectivity

Ultraviolet radiation

Distortion

Modulation

RELATED CONTENT


Back to Top