1 December 2010 Measurement of aberrations of a solid elastic lens using a point-diffraction interferometer
Author Affiliations +
Optical Engineering, 49(12), 123401 (2010). doi:10.1117/1.3522645
There has been a considerable recent increase in the use of variable focal length lenses (VFLLs), especially as microlenses in photographic objectives, endoscopes, microscope objectives, etc. One distinguishing feature of these VFLLs is the presence of a mechanism whereby the shape of the lens and its geometrical parameters can be changed. A new type of variable focal length lens is introduced made from elastic material. It is placed inside a mechanical mount where radial forces can be applied to its perimeter. We also present the optomechanical design and the measurement of wavefront aberrations to the third and fifth order of a solid elastic lens (SEL). A point-diffraction interferometer is used as a wavefront sensor to test changes of the lens. Geometrical changes in the lens produce changes in the aberrations. Finally, the aberrations found in the SEL (without any application of stress) are compared with aberrations obtained by means of numerical ray trace. Some experimental results are also shown.
Agustin Santiago-Alvarado, Sergio Vázquez-Montiel, Fermin-Solomon Granados-Agustin, Jorge Gonzalez-Garcia, Esteban Rueda-Soriano, Manuel Campos-Garcia, "Measurement of aberrations of a solid elastic lens using a point-diffraction interferometer," Optical Engineering 49(12), 123401 (1 December 2010). https://doi.org/10.1117/1.3522645


Practical Tilted Mirror Systems
Proceedings of SPIE (December 19 1986)
Imaging aberrations from null correctors
Proceedings of SPIE (November 27 2007)
Interferometry Of Large Diameter Beam Expanders
Proceedings of SPIE (December 30 1981)
Optimizing a deep UV projection lens with a 442 nm...
Proceedings of SPIE (November 01 1990)

Back to Top