1 August 2010 Luminescent photoelastic coating image analysis and strain separation on a three-dimensional grid
Author Affiliations +
Abstract
The luminescent photoelastic coating technique is an optical technique to measure the full-field strain on 3-D structural components. A luminescent dye within a photoelastic binder is excited with circular polarized light, and the corresponding coating emission intensity is detected via a digital camera for loaded and unloaded states of the specimen to which the coating is applied. Images are processed to find the relative change in emission with respect to camera analyzer position and subsequently analyzed to determine maximum in-plane shear strain and the principal strain directions. For 3-D structures with moderate movement or deflection in the field of view, especially when implementing an oblique excitation approach to separate the principal strains while accounting for non-strain-related polarization changes due to surface inclination, the image analysis is preferably performed on a 3-D grid. This study describes such an approach and discusses the analysis procedures to separate the principal strains and to obtain full-field strain distribution. The theoretical results are compared to experimental data from both a 2-D and a 3-D test specimen.
© (2010) Society of Photo-Optical Instrumentation Engineers (SPIE)
Ergin Esirgemez, Ergin Esirgemez, James Paul Hubner, James Paul Hubner, } "Luminescent photoelastic coating image analysis and strain separation on a three-dimensional grid," Optical Engineering 49(8), 083601 (1 August 2010). https://doi.org/10.1117/1.3475946 . Submission:
JOURNAL ARTICLE
14 PAGES


SHARE
Back to Top