1 September 2011 Output beam characteristics of the radio frequency-excited slab CO2 laser with unstable-waveguide hybrid resonator
Du Wang, Gen Li, Yingxiong Qin, Xiahui Tang
Author Affiliations +
Abstract
A positive branch unstable-waveguide hybrid resonator has been designed for a RF-excited slab CO2 laser of 100 W level. The output beam mode and the propagation characteristics in the two directions of unstable and waveguide were investigated by numerical and experimental methods. The results show that the output beam was collimated in the unstable direction, and was an approximate fundamental mode in the waveguide direction with a divergence angle of 12 mrad. The output power decreased by 50% with the misaligned angle of the tail mirror of 1.5 mrad, and was close to 0 with the misaligned angle more than 3 mrad.
©(2011) Society of Photo-Optical Instrumentation Engineers (SPIE)
Du Wang, Gen Li, Yingxiong Qin, and Xiahui Tang "Output beam characteristics of the radio frequency-excited slab CO2 laser with unstable-waveguide hybrid resonator," Optical Engineering 50(9), 094204 (1 September 2011). https://doi.org/10.1117/1.3626578
Published: 1 September 2011
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Resonators

Waveguides

Mirrors

Gas lasers

Laser resonators

Electrodes

Wave propagation

Back to Top