1 December 2011 Spatiotemporal computed tomography of dynamic processes
Author Affiliations +
Optical Engineering, 50(12), 123201 (2011). doi:10.1117/1.3660298
Modern computed tomography (CT) equipment allowing fast 3-D imaging also makes it possible to monitor dynamic processes by 4-D imaging. Because the acquisition time of various 3-D-CT systems is still in the range of at least milliseconds or even hours, depending on the detector system and the source, the balance of the desired temporal and spatial resolution must be adjusted. Furthermore, motion artifacts will occur, especially at high spatial resolution and longer measuring times. We propose two approaches based on nonsequential projection angle sequences allowing a convenient postacquisition balance of temporal and spatial resolution. Both strategies are compatible with existing instruments, needing only a simple reprograming of the angle list used for projection acquisition and care with the projection order list. Both approaches will reduce the impact of artifacts due to motion. The strategies are applied and validated with cold neutron imaging of water desorption from originally saturated particles during natural air-drying experiments and with x-ray tomography of a polymer blend heated during imaging.
Anders P. Kaestner, Beat Munch, Pavel Trtik, "Spatiotemporal computed tomography of dynamic processes," Optical Engineering 50(12), 123201 (1 December 2011). https://doi.org/10.1117/1.3660298

Binary data



Spatial resolution

Computed tomography

Temporal resolution

Data acquisition

Back to Top