1 December 2011 Display and detail enhancement for high-dynamic-range infrared images
Author Affiliations +
Optical Engineering, 50(12), 127401 (2011). doi:10.1117/1.3659698
Dynamic range reduction and detail enhancement are two important issues for effectively displaying high-dynamic-range images acquired by thermal camera systems. They must be performed in such a way that the high dynamic range image signal output from sensors is compressed in a pleasing manner for display on lower dynamic range monitors without reducing the perceptibility of small details. In this paper, a new method of display and detail enhancement for high dynamic range infrared images is presented. This method effectively maps the raw acquired infrared image to 8-bit domain based on the same architecture of bilateral filter and dynamic range partitioning approach. It includes three main steps: First, a bilateral filter is applied to separate the input image into the base component and detail component. Second, refine the base and detail layer using an adaptive Gaussian filter to avoid unwanted artifacts. Then the base layer is projected to the display range and the detail layer is enhanced using an adaptive gain control approach. Finally, the two parts are recombined and quantized to 8-bit domain. The strength of the proposed method lies in its ability to avoid unwanted artifacts and adaptability in different scenarios. Its great performance is validated by the experimental results tested with two real infrared imagers.
Chao Zuo, Qian Chen, Ning Liu, Jianle Ren, Xiubao Sui, "Display and detail enhancement for high-dynamic-range infrared images," Optical Engineering 50(12), 127401 (1 December 2011). https://doi.org/10.1117/1.3659698

Infrared imaging

Infrared radiation

High dynamic range imaging

Image filtering

Gaussian filters


Digital filtering

Back to Top