1 May 2011 Novel high-brightness backlight module for autostereoscopic liquid crystal display
Author Affiliations +
Abstract
Currently, the mainstream autostereoscopic displays have a shortcoming: the insufficient brightness. It causes bad influence on the using of autostereoscopic displays. To improve the brightness, a new design method of the backlight module is needed. In this article, one high-brightness light emitting diode (LED) is used, and the light is concentrated to the eyes of observer by using a Fresnel lens and many cylindrical lenses. The brightness is improved significantly. When the user position changes greatly, another LED is lighted up to replace the former. Imitation and experimental results indicate that this method is feasible. Compare with previous backlight modules, this backlight module is brighter and need less electrical energy, and is more suitable for cockpits.
© (2011) Society of Photo-Optical Instrumentation Engineers (SPIE)
Xiangbing Zhu, Qiaoyun Chen, Feng Jiang, Han Wu, "Novel high-brightness backlight module for autostereoscopic liquid crystal display," Optical Engineering 50(5), 054001 (1 May 2011). https://doi.org/10.1117/1.3574070 . Submission:
JOURNAL ARTICLE
7 PAGES


SHARE
RELATED CONTENT

LED collimation module for time sequential back light system
Proceedings of SPIE (September 25 2014)
Stereoscopic display technologies for FHD 3D LCD TV
Proceedings of SPIE (May 14 2010)
A study of LED light linear device for light guide...
Proceedings of SPIE (September 21 2007)
Design of a novel LED lens cap and optimization of...
Proceedings of SPIE (April 21 2006)
LED-driven backlights for automotive displays
Proceedings of SPIE (September 28 2007)
Optimization of a multiview system based on pulsed LED LCD...
Proceedings of SPIE (February 24 2012)

Back to Top