1 September 2011 Virtual display design using waveguide hologram in conical mounting configuration
Author Affiliations +
Abstract
An improved virtual display is proposed by using a waveguide holographic configuration with two total internal reflection holographic gratings in conical mounting and two volume hologram in classical mounting recorded on a single transparent planar waveguide. Using this compact configuration, efficiency can be dramatically improved and assembly is easy to be realized. The main principle and the method of intensity uniformity control are present in the paper. The analysis and simulation results are also explained. The virtual display system design shows good optical performance with 25 deg. field of view, a large pupil about 43 mm, little distortion less than 1%, and low aberration. The configuration can be used to a portable or wearable display.
© (2011) Society of Photo-Optical Instrumentation Engineers (SPIE)
Zhanjun Yan, Wenqiang Li, Yongjun Zhou, Mingwu Kang, Zhenrong Zheng, "Virtual display design using waveguide hologram in conical mounting configuration," Optical Engineering 50(9), 094001 (1 September 2011). https://doi.org/10.1117/1.3617409 . Submission:
JOURNAL ARTICLE
9 PAGES


SHARE
Back to Top