1 November 2012 Influence of readout process on presampled modulation transfer function in computed radiography system
Author Affiliations +
Abstract
In a computed radiography (CR) system, there are a number of different mechanisms that cause blurring. The aim of this study was to analyze intrinsic system factors of CR systems that could affect the modulation transfer function (MTF), such as afterglow during readout and the anti-alias filter before analog to digital converter. Methods and Materials: Mathematical slit and edge images were generated from analytical functions. These images were arranged perpendicularly to the laser scan and the plate scan directions, respectively. The influence of afterglow and the anti-alias filter was simulated by using Microsoft Excel. The MTF values calculated from those simulation images were compared with the theoretical MTF values obtained analytically. Results: MTF values in the laser scan direction measured with the slit and edge methods were significantly lower than MTF values in the plate scan direction. The degree of influence on MTF with respect to afterglow and the anti-alias filters was different depending on the measurement method and the scan directions of CR systems. The influence of the anti-alias filters mainly contributed to the differences between MTF values with the slit and edge methods in the laser scan direction.
© 2012 Society of Photo-Optical Instrumentation Engineers (SPIE)
Yasuyuki Kawaji, Yasuyuki Kawaji, Fukai Toyofuku, Fukai Toyofuku, Tadamitsu Ideguchi, Tadamitsu Ideguchi, Yoshiharu Higashida, Yoshiharu Higashida, } "Influence of readout process on presampled modulation transfer function in computed radiography system," Optical Engineering 51(11), 113202 (1 November 2012). https://doi.org/10.1117/1.OE.51.11.113202 . Submission:
JOURNAL ARTICLE
9 PAGES


SHARE
Back to Top