3 November 2012 Calibration technology in application of robot-laser scanning system
Author Affiliations +
Abstract
A system composed of laser sensor and 6-DOF industrial robot is proposed to obtain complete three-dimensional (3-D) information of the object surface. Suitable for the different combining ways of laser sensor and robot, a new method to calibrate the position and pose between sensor and robot is presented. By using a standard sphere with known radius as a reference tool, the rotation and translation matrices between the laser sensor and robot are computed, respectively in two steps, so that many unstable factors introduced in conventional optimization methods can be avoided. The experimental results show that the accuracy of the proposed calibration method can be achieved up to 0.062 mm. The calibration method is also implemented into the automated robot scanning system to reconstruct a car door panel.
© 2012 Society of Photo-Optical Instrumentation Engineers (SPIE) 0091-3286/2012/$25.00 © 2012 SPIE
Yong-jie Ren, ShiBin Yin, and Jigui Zhu "Calibration technology in application of robot-laser scanning system," Optical Engineering 51(11), 114204 (3 November 2012). https://doi.org/10.1117/1.OE.51.11.114204
Published: 3 November 2012
Lens.org Logo
CITATIONS
Cited by 40 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Calibration

Optical spheres

Robotic systems

Clouds

Laser systems engineering

Optical scanning systems

Back to Top