11 April 2012 Modeling of a passively Q-switched Nd3+∶Cr4+ all-fiber laser
Author Affiliations +
A numerical model of an all-fiber Nd3+ laser passively Q-switched with Cr4+ is presented. The repetition rate, average output power, and pulse width have been calculated with the same parameters as those of an experimental setup of another group. We found a qualitative agreement between the two results. The validated model has been used on another proposed setup to investigate and optimize laser parameters. The low and high self-impulse amplitude regimes were found for different Cr4+ ion densities. The optimal efficiency of the high regime was established when the saturable absorber density increases.
© 2012 Society of Photo-Optical Instrumentation Engineers (SPIE)
Hocine Djellout, Hocine Djellout, Rabah Mokdad, Rabah Mokdad, Mustapha Benarab, Mustapha Benarab, Farid Ait Ouamer, Farid Ait Ouamer, Mokrane Tamine, Mokrane Tamine, Omar Lamrous, Omar Lamrous, Patrick P. Meyrueis, Patrick P. Meyrueis, } "Modeling of a passively Q-switched Nd3+∶Cr4+ all-fiber laser," Optical Engineering 51(4), 044203 (11 April 2012). https://doi.org/10.1117/1.OE.51.4.044203 . Submission:


Cross relaxation in Tm-doped fiber lasers
Proceedings of SPIE (May 15 2013)
Pulsed self Raman laser operation in Nd SrMoO4 at 1.57...
Proceedings of SPIE (February 12 2008)
Novel fiber-MOPA-based high power blue laser
Proceedings of SPIE (May 07 2012)
Pulse generation of Nd LSB Cr YAG microchip laser ...
Proceedings of SPIE (February 15 2005)

Back to Top