6 July 2012 Single and multiple transmissions Pankove procedures for measuring spectral refractive indices of slab material from its spectrophotometric measurements
El-Sayed El-Zaiat, Samy Farag
Author Affiliations +
Abstract
Analytical expressions, based on single and multiple incoherent beams at slab interfaces, are revised. It is applied for determining spectral refractive indices of plane parallel slab material. These expressions were introduced by Pankove and have been widely used in optical measurements. However, some researchers misuse these expressions by using the total slab reflectance instead of the interface reflectance. Refractive indices of four glassy slabs with different thicknesses and composition are experimentally measured and compared with that given by the glasses manufacturer. These expressions give precise results with experimental error of about 0.022 across broad spectral range of 0.2 to 2.5 um. Comparisons between the correct use and misused expressions in case of single and multiple beams are presented. The misuse of expressions produces percentage deviation from the reference values of about 17.6% to 24.4% depending on the slab refractive index.
© 2012 Society of Photo-Optical Instrumentation Engineers (SPIE) 0091-3286/2012/$25.00 © 2012 SPIE
El-Sayed El-Zaiat and Samy Farag "Single and multiple transmissions Pankove procedures for measuring spectral refractive indices of slab material from its spectrophotometric measurements," Optical Engineering 51(7), 073604 (6 July 2012). https://doi.org/10.1117/1.OE.51.7.073604
Published: 6 July 2012
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Refractive index

Reflectivity

Interfaces

Glasses

Reflection

Transmittance

Spectrophotometry

Back to Top