10 October 2013 Basic image cell in contact-type multiview three-dimensional imaging systems
Author Affiliations +
Abstract
The viewing zone of a contact-type multiview three-dimensional imaging system are divided into nine viewing regions by assuming that at least n−2 pixel cells can be viewed at each of the regions, where n is the total number of pixel cells in horizontal direction of a display panel. Each of these regions consists of m 2 subregions, where m is the number of pixels in the horizontal of a pixel cell. The image viewed at each of the subregions reveals a disparity of 1 pixel distance with that viewed at its adjacent subregion. Hence, each subregion is defined as a basic image cell that can provide the disparity of a pixel distance with its immediate neighbors. The width of the cell is independent of the focal length of the viewing zone forming optics but highly sensitive to the pixel size. It can be smaller than viewers’ pupil sizes by decreasing the pixel size.
© 2013 Society of Photo-Optical Instrumentation Engineers (SPIE)
Wook-Ho Son, Jinwoong Kim, Min-Chul Park, Beom-Ryeol Lee, Jung-Young Son, "Basic image cell in contact-type multiview three-dimensional imaging systems," Optical Engineering 52(10), 103107 (10 October 2013). https://doi.org/10.1117/1.OE.52.10.103107 . Submission:
JOURNAL ARTICLE
12 PAGES


SHARE
Back to Top