12 November 2013 Errata: Improvement of magnetorheological finishing surface quality by nanoparticle jet polishing
Author Affiliations +
Optical Engineering, 52(11), 119801 (2013). doi:10.1117/1.OE.52.11.119801
Abstract
This article [Opt. Eng.. 52, (4 ), 043401 (2013)] was originally published on 15 April 2013 with an error on page 6, Sec. 4, paragraph 2. The first sentence “Figure 8 shows the AFM image of surface microstructure images of 10×10  μm on the silica glass surface…” has been corrected to read “Figure 8 shows the AFM image of surface microstructure images of 5×5  μm on the silica glass surface…”
Peng, Li, Guan, Shen, Dail, and Wang: Errata: Improvement of magnetorheological finishing surface quality by nanoparticle jet polishing

This article [Opt. Eng. 52(4), 043401 (2013)] was originally published on 15 April 2013 with an error on page 6, Sec. 4, paragraph 2. The first sentence “Figure 8 shows the AFM image of surface microstructure images of 10×10μm on the silica glass surface…” has been corrected to read “Figure 8 shows the AFM image of surface microstructure images of 5×5μm on the silica glass surface…”

The paper was corrected online on 7 November 2013.

Wenqiang Peng, Shengyi Li, Chaoliang Guan, Xinmin Shen, Yifan Dail, Zhuo Wang, "Errata: Improvement of magnetorheological finishing surface quality by nanoparticle jet polishing," Optical Engineering 52(11), 119801 (12 November 2013). http://dx.doi.org/10.1117/1.OE.52.11.119801
Submission: Received ; Accepted
JOURNAL ARTICLE
2 PAGES


SHARE
KEYWORDS
Surface finishing

Polishing

Nanoparticles

Magnetorheological finishing

Glasses

Silica

Atomic force microscopy

Back to Top