1 March 2013 Development of an inspection system for planar steel surface using multispectral photometric stereo
Author Affiliations +
Abstract
We address the methodology and hardware design for detecting defects on a steel surface. The goal of this work is to develop a surface inspection system for defects with three-dimensional (3-D) characteristics on planar steel surface using multispectral photometric stereo technique. First, the reflections of multispectral illuminations from a steel surface are captured by a multi-channel camera system. Then, a 3-D reconstructed surface profile is extracted from estimated gradient fields. The developed system is applied to real steel specimens and the experimental results show that it can reliably detect tiny defects on the surface.
© 2013 Society of Photo-Optical Instrumentation Engineers (SPIE)
Dongyeop Kang, Dongyeop Kang, Yu Jin Jang, Yu Jin Jang, Sangchul Won, Sangchul Won, } "Development of an inspection system for planar steel surface using multispectral photometric stereo," Optical Engineering 52(3), 039701 (1 March 2013). https://doi.org/10.1117/1.OE.52.3.039701 . Submission:
JOURNAL ARTICLE
8 PAGES


SHARE
RELATED CONTENT

I SIL features and capabilities of a long range...
Proceedings of SPIE (May 18 2005)
Three-dimensional line-scan intensity ratio sensing
Proceedings of SPIE (February 29 1992)

Back to Top