15 April 2013 Knowledge-based automated road network extraction system using multispectral images
Author Affiliations +
Optical Engineering, 52(4), 047203 (2013). doi:10.1117/1.OE.52.4.047203
Abstract
A novel approach for automated road network extraction from multispectral WorldView-2 imagery using a knowledge-based system is presented. This approach uses a multispectral flood-fill technique to extract asphalt pixels from satellite images; it follows by identifying prominent curvilinear structures using template matching. The extracted curvilinear structures provide an initial estimate of the road network, which is refined by the knowledge-based system. This system breaks the curvilinear structures into small segments and then groups them using a set of well-defined rules; a saliency check is then performed to prune the road segments. As a final step, these segments, carrying road width and orientation information, can be reconstructed to generate a proper road map. The approach is shown to perform well with various urban and suburban scenes. It can also be deployed to extract the road network in large-scale scenes.
© 2013 Society of Photo-Optical Instrumentation Engineers (SPIE)
Weihua Sun, David W. Messinger, "Knowledge-based automated road network extraction system using multispectral images," Optical Engineering 52(4), 047203 (15 April 2013). https://doi.org/10.1117/1.OE.52.4.047203
JOURNAL ARTICLE
15 PAGES


SHARE
RELATED CONTENT


Back to Top