4 June 2013 Shape-controllable polymeric microlens array duplicated by electrostatic force deformed template
Author Affiliations +
Here, we introduced a new method to fabricate a shape-controllable microlens array (MLA). A conductive membrane was deformed by electrostatic force through applied voltage on its underneath electrodes, and polymer primer was poured in this concave template to form an MLA after curing and a demolding process. Through changing the initial contour of the template as well as the location and bias of the underneath electrodes, the so-called molding by electrostatic force deformed template (MEFDT) method has the ability to realize a shape-controllable microsized MLA in a flexible, easy-to-design, and low-cost way. Polydimethylsiloxane MLAs were fabricated to verify this MEFDT method, and the fabricated MLAs had a surface roughness less than 2 nm that showed acceptable optical smoothness, and their focal lengths were demonstrated to be adjustable by applying different voltage on their affiliated templates.
© 2013 Society of Photo-Optical Instrumentation Engineers (SPIE)
Zhao Wu, Zhao Wu, Qing-na Wang, Qing-na Wang, Hong-da Sun, Hong-da Sun, Miao Lu, Miao Lu, } "Shape-controllable polymeric microlens array duplicated by electrostatic force deformed template," Optical Engineering 52(6), 063401 (4 June 2013). https://doi.org/10.1117/1.OE.52.6.063401 . Submission:

Back to Top