3 September 2013 Optimizations for optical velocity measurements in narrow gaps
Author Affiliations +
Abstract
Measuring the flow velocity in small gaps or near a surface with a nonintrusive optical measurement technique is a challenging measurement task, as disturbing light reflections from the surface appear. However, these measurements are important, e.g., in order to understand and to design the leakage flow in the tip gap between the rotor blade end face and the housing of a turbomachine. Hence, methods to reduce the interfering light power and to correct measurement errors caused by it need to be developed and verified. Different alternatives of minimizing the interfering light power for optical flow measurements in small gaps are presented. By optimizing the beam shape of the applied illumination beam using a numerical diffraction simulation, the interfering light power is reduced by up to a factor of 100. In combination with a decrease of the reflection coefficient of the rotor blade surface, an additional reduction of the interfering light power below the used scattered light power is possible. Furthermore, a correction algorithm to decrease the measurement uncertainty of disturbed measurements is derived. These improvements enable optical three-dimensional three-component flow velocity measurements in submillimeter gaps or near a surface.
© 2013 Society of Photo-Optical Instrumentation Engineers (SPIE)
Raimund Schlüßler, Raimund Schlüßler, Christian Blechschmidt, Christian Blechschmidt, Jürgen W. Czarske, Jürgen W. Czarske, Andreas Fischer, Andreas Fischer, } "Optimizations for optical velocity measurements in narrow gaps," Optical Engineering 52(9), 094101 (3 September 2013). https://doi.org/10.1117/1.OE.52.9.094101 . Submission:
JOURNAL ARTICLE
10 PAGES


SHARE
RELATED CONTENT

Beyond beam divergence
Proceedings of SPIE (April 16 1995)
Comparison Of Scatter Data From Various Beam Dumps
Proceedings of SPIE (December 31 1986)
High-precision triangulation sensing of mirror surface
Proceedings of SPIE (May 07 2001)

Back to Top