15 July 2014 Research on laser wavelength measurement with rotating Fabry–Perot mirror
Author Affiliations +
Abstract
A method using rotating Fabry–Perot (FP) mirror to measure CO2 laser wavelength was developed. The variation of FP transmittance changing with laser incident angle was calculated theoretically and the variation curve was given. The calculation illustrates that the variation of FP reflectance with incident angle 0 to 30 deg has little effect on the transmittance of FP. In the experiments, the CO2 laser transmittance variation of FP was measured at a wavelength of 9.27 μm. To improve the measurement precision of the laser wavelength, the method using the centrosymmetric peaks of FP transmittance curve in the range from −20 to +20  deg of laser incident angle was proposed. The precision of the measurement is about 0.01 μm. The experiment result is consistent with theoretical analysis, which demonstrates the feasibility of the laser wavelength measurement using rotating FP method.
© 2014 Society of Photo-Optical Instrumentation Engineers (SPIE) 0091-3286/2014/$25.00 © 2014 SPIE
Zhaoshuo Tian, Zhenghe Sun, Yanchao Zhang, and Shiyou Fu "Research on laser wavelength measurement with rotating Fabry–Perot mirror," Optical Engineering 53(7), 074107 (15 July 2014). https://doi.org/10.1117/1.OE.53.7.074107
Published: 15 July 2014
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Transmittance

Gas lasers

Laser applications

Germanium

Reflectivity

Carbon monoxide

RELATED CONTENT

Ultrastable Carbon Dioxide (CO[sub]2[/sub]) Lasers
Proceedings of SPIE (July 12 1988)
Slab overtone carbon monoxide laser
Proceedings of SPIE (February 19 2009)
Two kinds of new beam lasers
Proceedings of SPIE (August 15 1998)

Back to Top