12 November 2014 Design of 1×3 power splitter based on photonic crystal ring resonator
Author Affiliations +
Abstract
Ring resonators based on photonic crystals have attracted worldwide attention due to their wide applications attributed to their significant properties. By comparing different inner rod configurations reported for photonic crystal ring resonators (PCRRs), we propose a configuration for inner rods similar to diamond, which is called the “diamond inner rod configuration.” In comparison with previous proposed configurations for inner rods, the diamond inner rod configuration increases the vertical waveguide output with respect to the horizontal waveguide. With this configuration a 50-50 output can be gained for two outputs, horizontal and vertical waveguides, at 1.829 and 1.6777  μm. Additionally, at 1.8438  μm there is a considerable drop toward a vertical waveguide. In order to have a comparison among the PCRRs with various inner rod configurations, the maximum power of outputs and also the quality factors have been shown schematically. To generalize our proposed configuration, in addition to a channel drop filter (CDF) based on a single-ring resonator, we designed a double-ring resonator in which the same powers can also be successively gained from three outputs at 1.876  μm by engineering the parameters of the structure.
© 2014 Society of Photo-Optical Instrumentation Engineers (SPIE)
Foozieh Sohrabi, Foozieh Sohrabi, Tayebeh Mahinroosta, Tayebeh Mahinroosta, Seyedeh Mehri Hamidi, Seyedeh Mehri Hamidi, } "Design of 1×3 power splitter based on photonic crystal ring resonator," Optical Engineering 53(11), 115104 (12 November 2014). https://doi.org/10.1117/1.OE.53.11.115104 . Submission:
JOURNAL ARTICLE
8 PAGES


SHARE
RELATED CONTENT


Back to Top