21 May 2014 Suppression of stitching edge artifacts with weighting technique
Author Affiliations +
Abstract
In the subaperture stitching test, mismatch between the overlapping areas always exists due to various kinds of error sources, which results in stitching edge artifacts. Although the visibility of the artifacts is dependent on many factors, it is necessary to study how to remove it. A weighting technique was proposed to suppress the stitching edge artifacts. Its performance was demonstrated by using simulation. Finally, the experimental results verify its effectiveness to suppress the stitching edge artifacts in actual measurements.
© 2014 Society of Photo-Optical Instrumentation Engineers (SPIE)
Pengfei Zhang, Pengfei Zhang, Hong Zhao, Hong Zhao, Jin Huang, Jin Huang, Bingcai Liu, Bingcai Liu, Fen Gao, Fen Gao, } "Suppression of stitching edge artifacts with weighting technique," Optical Engineering 53(5), 054106 (21 May 2014). https://doi.org/10.1117/1.OE.53.5.054106 . Submission:
JOURNAL ARTICLE
5 PAGES


SHARE
Back to Top