26 June 2014 Noise modeling by the trend of each range gate for coherent Doppler LIDAR
Author Affiliations +
A denoising method of all-fiber pulsed coherent Doppler LIDAR (CDL) is investigated. The goal is to enhance the signal-to-noise ratio (SNR) in the weak signal regime. Based on differential detection theory, the total noise expression of CDL with a dual-balanced detector is introduced and analyzed. The conclusion is drawn that the total noise can be acquired under the local oscillator laser exposure conditions by reasonable simplification. Using the actual measured data, the ratio of the standard deviation to the mean value of the total noise in each range gate is obtained and is up to approximately 11%. In order to suppress the jitter of the noise, an effective noise modeling by the trend of each range gate is developed. The feasibility of this method is verified by a long set of measured data. The spatial and temporal distribution of wind speed is illustrated with 400 pulses accumulation. Compared to the noise modeling of the tail, the detection range of wind speed using the proposed method can be improved by 35.3%.
© 2014 Society of Photo-Optical Instrumentation Engineers (SPIE)
Zhichao Bu, Zhichao Bu, Yinchao Zhang, Yinchao Zhang, Siying Chen, Siying Chen, Pan Guo, Pan Guo, Lu Li, Lu Li, He Chen, He Chen, } "Noise modeling by the trend of each range gate for coherent Doppler LIDAR," Optical Engineering 53(6), 063109 (26 June 2014). https://doi.org/10.1117/1.OE.53.6.063109 . Submission:


Balanced-heterodyne detection of optical squeezing
Proceedings of SPIE (November 28 2012)
All-fiber coherent Doppler lidar
Proceedings of SPIE (November 28 2016)
Optical noise in a coherent lidar
Proceedings of SPIE (August 12 1993)

Back to Top