Backlight units based on light extraction from a curved optical fiber

Ichiro Fujieda; Kazuma Arizono; Kazuki Nishida; Naoki Takigawa

doi:10.1117/1.OE.53.6.065104

24 June 2014 Backlight units based on light extraction from a curved optical fiber

Ichiro Fujieda, Kazuma Arizono, Kazuki Nishida, Naoki Takigawa

Author Affiliations +

Optical Engineering, Vol. 53, Issue 6, 065104 (June 2014). https://doi.org/10.1117/1.OE.53.6.065104

Abstract

A backlight unit is constructed by laying out a plastic optical fiber (POF) in a curved trench fabricated in a light-guide plate. First, the light leaks out of the POF at curved sections and enters the plate. Next, the light is extracted from the plate by some microstructures fabricated on the surfaces of the plate. Coupled to a laser diode, its optical power can be efficiently and uniformly delivered over a large area via the POF. In this experiment, we fabricated a 10 cm×10 cm×3 mm prototype unit with off-the-shelf components. It becomes see-through when the space around the POF is filled with index-matching oil. One can build an arbitrary-shaped planar light source by tiling multiple cells and connecting them by a POF. The light inside the POF is depleted as it propagates downstream. This can be compensated by decreasing the radii of curvature. Microstructures on the light-guide plate can distort the passage of ambient light. For a see-through unit, we can distribute them sparsely and/or use absorbers. A see-through backlight unit is a relatively unexplored device, and it might pave the way for new applications.

CC BY: © The Authors. Published by SPIE under a Creative Commons Attribution 4.0 Unported License. Distribution or reproduction of this work in whole or in part requires full attribution of the original publication, including its DOI.

Citation Download Citation

Ichiro Fujieda, Kazuma Arizono, Kazuki Nishida, and Naoki Takigawa "Backlight units based on light extraction from a curved optical fiber," Optical Engineering 53(6), 065104 (24 June 2014). https://doi.org/10.1117/1.OE.53.6.065104

Published: 24 June 2014

ACCESS THE FULL ARTICLE

JOURNAL ARTICLE
8 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

KEYWORDS

Phase only filters

Optical fibers

Output couplers

LCDs

Prototyping

Reflectors

Diffusers

Show All Keywords

Keywords/Phrases

Search In:

Publication Years