20 June 2014 Beacon system based on light-emitting diode sources for runways lighting
Author Affiliations +
Optical Engineering, 53(6), 066104 (2014). doi:10.1117/1.OE.53.6.066104
New aeronautical ground lighting techniques are becoming increasingly important to ensure the safety and reduce the maintenance costs of the plane’s tracks. Until recently, tracks had embedded lighting systems whose sources were based on incandescent lamps. But incandescent lamps have several disadvantages: high energy consumption and frequent breakdowns that result in high maintenance costs (lamp average life-time is ∼1500 operating hours) and the lamp’s technology has a lack of new lighting functions, such as signal handling and modification. To solve these problems, the industry has developed systems based on light-emitting diode (LED) technology with improved features: (1) LED lighting consumes one tenth the power, (2) it improves preventive maintenance (an LED’s lifetime range is between 25,000 and 100,000 hours), and (3) LED lighting technology can be controlled remotely according to the needs of the track configuration. LEDs have been in use for more than three decades, but only recently, around 2002, have they begun to be used as visual aids, representing the greatest potential change for airport lighting since their inception in the 1920s. Currently, embedded LED systems are not being broadly used due to the specific constraints of the rules and regulations of airports (beacon dimensions, power system technology, etc.). The fundamental requirements applied to embedded lighting systems are to be hosted on a volume where the dimensions are usually critical and also to integrate all the essential components for operation. An embedded architecture that meets the lighting regulations for airport runways is presented. The present work is divided into three main tasks: development of an optical system to optimize lighting according to International Civil Aviation Organization, manufacturing prototype, and model validation.
© 2014 Society of Photo-Optical Instrumentation Engineers (SPIE)
Mario Gonzalez Montes, Daniel Vázquez, Antonio A. Fernandez-Balbuena, Eusebio Bernabeu, "Beacon system based on light-emitting diode sources for runways lighting," Optical Engineering 53(6), 066104 (20 June 2014). https://doi.org/10.1117/1.OE.53.6.066104


A novel optimization strategy for LED street lamp designing
Proceedings of SPIE (December 31 2013)
Rapid design of LED optical elements with two free form...
Proceedings of SPIE (October 15 2013)
Linear lighting systems for shelf and cove lighting
Proceedings of SPIE (September 13 2005)
High performance LED lamps for the automobile needs and...
Proceedings of SPIE (September 26 2007)
Energy efficient lighting for the biological clock
Proceedings of SPIE (February 09 2011)

Back to Top