15 July 2014 Research on laser wavelength measurement with rotating Fabry–Perot mirror
Author Affiliations +
A method using rotating Fabry–Perot (FP) mirror to measure CO2 laser wavelength was developed. The variation of FP transmittance changing with laser incident angle was calculated theoretically and the variation curve was given. The calculation illustrates that the variation of FP reflectance with incident angle 0 to 30 deg has little effect on the transmittance of FP. In the experiments, the CO2 laser transmittance variation of FP was measured at a wavelength of 9.27 μm. To improve the measurement precision of the laser wavelength, the method using the centrosymmetric peaks of FP transmittance curve in the range from −20 to +20  deg of laser incident angle was proposed. The precision of the measurement is about 0.01 μm. The experiment result is consistent with theoretical analysis, which demonstrates the feasibility of the laser wavelength measurement using rotating FP method.
© 2014 Society of Photo-Optical Instrumentation Engineers (SPIE)
Zhaoshuo Tian, Zhaoshuo Tian, Zhenghe Sun, Zhenghe Sun, Yanchao Zhang, Yanchao Zhang, Shiyou Fu, Shiyou Fu, } "Research on laser wavelength measurement with rotating Fabry–Perot mirror," Optical Engineering 53(7), 074107 (15 July 2014). https://doi.org/10.1117/1.OE.53.7.074107 . Submission:


Ultrastable Carbon Dioxide (CO[sub]2[/sub]) Lasers
Proceedings of SPIE (July 11 1988)
Slab overtone carbon monoxide laser
Proceedings of SPIE (February 19 2009)
Two kinds of new beam lasers
Proceedings of SPIE (August 14 1998)

Back to Top