22 May 2014 Magnetorheological finishing for removing surface and subsurface defects of fused silica optics
Author Affiliations +
Abstract
We investigate the capacity of magnetorheological finishing (MRF) process to remove surface and subsurface defects of fused silica optics. Polished samples with engineered surface and subsurface defects were manufactured and characterized. Uniform material removals were performed with a QED Q22-XE machine using different MRF process parameters in order to remove these defects. We provide evidence that whatever the MRF process parameters are, MRF is able to remove surface and subsurface defects. Moreover, we show that MRF induces a pollution of the glass interface similar to conventional polishing processes.
© 2014 Society of Photo-Optical Instrumentation Engineers (SPIE)
Rodolphe Catrin, Rodolphe Catrin, Jerome Neauport, Jerome Neauport, Daniel Taroux, Daniel Taroux, Philippe Cormont, Philippe Cormont, Cedric Maunier, Cedric Maunier, Sebastien Lambert, Sebastien Lambert, } "Magnetorheological finishing for removing surface and subsurface defects of fused silica optics," Optical Engineering 53(9), 092010 (22 May 2014). https://doi.org/10.1117/1.OE.53.9.092010 . Submission:
JOURNAL ARTICLE
7 PAGES


SHARE
RELATED CONTENT

Controlling stress in sapphire optics
Proceedings of SPIE (October 31 1997)
Inverse topographic analysis of scratches
Proceedings of SPIE (December 21 2003)
Research of combination polishing technology
Proceedings of SPIE (October 06 2010)

Back to Top