21 December 2015 Fabrication of microlens array and bifocal microlens using the methods of laser ablation and solvent reflow
Author Affiliations +
Optical Engineering, 54(12), 123109 (2015). doi:10.1117/1.OE.54.12.123109
Based on the techniques of laser microdrilling and solvent reflow, this study reports on a straightforward approach for fabricating plastic microlens arrays (MLAs). First, we use the ArF excimer laser to drill microholes on a polymethylmethacrylate plate for defining the lens number, initial depth, and diameter. The propylene glycol monomethyl ether acetate solvent is then employed to regulate the surface profile that leads to a resulting negative (concave) MLA. The corresponding positive (convex), polydimethyl-siloxane MLA is obtained by the soft-replica-molding technique. Through varying the pattern size and period on the mask and the light intensity for laser drilling and regulating the solvent in the reflow process, we exhibit the feasibility of making MLAs with various sizes and shapes. By modifying the laser ablation step to drill two microholes with different diameters and depths at two levels, we fabricate a bifocal microlens. The obtained microlenses have excellent surface and optical properties: surface roughness down to several nanometers and focal lengths varying from hundreds to thousands of micrometers. This approach is flexible for constructing microlenses with various sizes and shapes and can fabricate MLAs with a high fill factor.
© 2015 Society of Photo-Optical Instrumentation Engineers (SPIE)
Cheng-Chian Yu, Jeng-Rong Ho, "Fabrication of microlens array and bifocal microlens using the methods of laser ablation and solvent reflow," Optical Engineering 54(12), 123109 (21 December 2015). https://doi.org/10.1117/1.OE.54.12.123109

Back to Top