17 February 2015 Cascade-able optical fiber delay-based temperature sensor system
Author Affiliations +
A high-sensitivity temperature sensor based on optical fiber delay is proposed in this paper. The sensor system is designed and tested in a temperature range of 0°C to 100°C with increments of 5°C. The output delay difference is found to be linearly proportional to the temperature with an average fluctuation less than 0.1 ps. To achieve an overall low cost and practical detection, a simple detection system is developed to measure temperature, and a potential for high temperature sensitivity is shown by analyzing the system. As a result, this sensor system is proven to be feasible and practical, and temperature can be measured in a simple and economical way.
© 2015 Society of Photo-Optical Instrumentation Engineers (SPIE)
Ning Yang, Ning Yang, Qi Qiu, Qi Qiu, Jun Su, Jun Su, Shuang-Jin Shi, Shuang-Jin Shi, } "Cascade-able optical fiber delay-based temperature sensor system," Optical Engineering 54(2), 026105 (17 February 2015). https://doi.org/10.1117/1.OE.54.2.026105 . Submission:

Back to Top