21 April 2016 Publisher’s Note: Effect on cross-polarization conversion by the end shape of eSRR in a multilayer metamaterial device
Author Affiliations +
Optical Engineering, 55(4), 049801 (2016). doi:10.1117/1.OE.55.4.049801
Abstract
This PDF file contains the errata for “OE Vol. 55 Issue 04 Paper OE-2016-0328-ERR” for OE Vol. 55 Issue 04
Chen, Bai, Bu, and Zhuang: Publisher’s Note: Effect on cross-polarization conversion by the end shape of eSRR in a multilayer metamaterial device

This paper was published online in the wrong section of Optical Engineering, resulting in erroneous citation information. It was originally published online under the Tutorial header on 18 March 2016 in Vol. 55, Iss. 3 with a CID of 030801.

It was removed from that section and republished in the same issue under the header “Materials, Photonic Devices, and Sensors.”

This change affects the official citation for this paper. The corrected citation is as follows:

Kejian ChenYang BaiTing BuSonglin Zhuang, “Effect on cross-polarization conversion by the end shape of eSRR in a multilayer metamaterial device,” Opt. Eng. 55(3), 037110 (2016).http://dx.doi.org/10.1117/1.OE.55.3.037110

The paper was corrected online on 29 March 2016. It appears correctly in print.

Kejian Chen, Yang Bai, Ting Bu, Songlin Zhuang, "Publisher’s Note: Effect on cross-polarization conversion by the end shape of eSRR in a multilayer metamaterial device," Optical Engineering 55(4), 049801 (21 April 2016). http://dx.doi.org/10.1117/1.OE.55.4.049801
Submission: Received ; Accepted
JOURNAL ARTICLE
1 PAGES


SHARE
KEYWORDS
Metamaterials

Optical engineering

Computer engineering

Sensors

Photonic devices

Computing systems

Optical components

RELATED CONTENT


Back to Top