Simple ps microchip Nd:YVO4 laser with 3.3-ps pulses at 0.2 to 1.4 MHz and single-stage amplification to the microjoule level

Erdal Türkyilmaz; Jan Lohbreier; Christian Günther; Eva Mehner; Daniel Kopf; Harald Giessen; Bernd Braun

doi:10.1117/1.OE.55.6.066126

29 June 2016 Simple ps microchip Nd:YVO₄ laser with 3.3-ps pulses at 0.2 to 1.4 MHz and single-stage amplification to the microjoule level

Erdal Türkyilmaz, Jan Lohbreier, Christian Günther, Eva Mehner, Daniel Kopf, Harald Giessen, Bernd Braun

Author Affiliations +

Optical Engineering, Vol. 55, Issue 6, 066126 (June 2016). https://doi.org/10.1117/1.OE.55.6.066126

Abstract

Commercial picosecond sources have found widespread applications. Typical system parameters are pulse widths below 20 ps, repetition rates between 0.1 and 2 MHz, and microjoule level pulse energies. Most systems are based on short pulse mode-locked oscillators, regenerative amplifiers, and pockel cells as active beam switches. In contrast, we present a completely passive system, consisting of a passively Q-switched microchip laser, a single-stage amplifier, and a pulse compressor. The Q-switched microchip laser has a 50-μm-long Nd:YVO₄ gain material optically bonded to a 4.6-mm-thick undoped YVO₄ crystal. It delivers pulse widths of 40 ps and repetition rates of 0.2 to 1.4 MHz at a wavelength of 1.064 μm. The pulse energy is a few nanojoule. These 40-ps pulses are spectrally broadened in a standard single-mode fiber and then compressed in a 24-mm-long chirped Bragg grating to as low as 3.3 ps. The repetition rate can be tuned from ∼0.2 to 1.4 MHz by changing the pump power, while the pulse width and the pulse energy from the microchip laser are unchanged. The spectral broadening in the fiber is observed throughout the pulse repetition rate, supporting sub-10-ps pulses. Finally, the pulses are amplified in a single-stage Nd:YVO₄ amplifier up to the microjoule level (up to 4 μJ pulse energy). As a result, the system delivers sub-10-ps pulses at a microjoule level with about 1 MHz repetition rate, and thus fulfills the requirements for ps-micromachining. It does not contain any active switching elements and can be integrated in a very compact setup.

Citation Download Citation

Erdal Türkyilmaz, Jan Lohbreier, Christian Günther, Eva Mehner, Daniel Kopf, Harald Giessen, and Bernd Braun "Simple ps microchip Nd:YVO₄ laser with 3.3-ps pulses at 0.2 to 1.4 MHz and single-stage amplification to the microjoule level," Optical Engineering 55(6), 066126 (29 June 2016). https://doi.org/10.1117/1.OE.55.6.066126

Published: 29 June 2016

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available