20 October 2016 CMOS and sCMOS imaging performance comparison by digital holographic interferometry
Author Affiliations +
We use a digital holographic interferometric setup to assess, as a proof of concept, two state-of-the-art sensors (CMOS and sCMOS cameras) that are widely used in nondestructive testing (NDT). This interferometric study is intended to evaluate the image quality recorded by any camera used in NDT. The assessing relies on the quantification of the optical phase information recovered by the cameras used for this study. For this, we calculate the signal-to-noise ratio, correlation coefficient, and quality index (Q-index) as main figures-of-merit. As far as we know, the Q-index has not been used for evaluation of the optical phase coming from image holograms. The CMOS and sCMOS sensors used record the same deformation event under the same experimental conditions. The experiment involves the inspection of a large sample (>1  m2 of area) which implies low illumination conditions for the imaging sensors. The retrieved CMOS optical phase shows artifacts that are not observed in the sCMOS. An analysis of these two groups of interferometric images is presented and discussed. The methodology set forth here can be applied to evaluate other sensors such as CCDs and EM-CCDs.
© 2016 Society of Photo-Optical Instrumentation Engineers (SPIE)
Jorge Mauricio Flores-Moreno, Jorge Mauricio Flores-Moreno, Manuel H. De la Torre-Ibarra, Manuel H. De la Torre-Ibarra, María del Socorro Hernández-Montes, María del Socorro Hernández-Montes, Carlos Perez Lopez, Carlos Perez Lopez, Fernando Mendoza-Santoyo, Fernando Mendoza-Santoyo, } "CMOS and sCMOS imaging performance comparison by digital holographic interferometry," Optical Engineering 55(12), 121728 (20 October 2016). https://doi.org/10.1117/1.OE.55.12.121728 . Submission:

Back to Top