18 February 2016 Optical waveguides fabricated by nitrogen ion implantation in fused silica
Author Affiliations +
Abstract
We report on the fabrication of waveguides in fused silica using 4.5-MeV nitrogen ion implantation with a fluence of 5.0×1014  ions/cm2. The prism-coupling method was employed to measure the effective refractive indices of guiding modes at the wavelengths of 632.8 and 1539 nm. The effective refractive indices of the first few modes were higher than that of the substrate. The refractive index profiles at 632.8 and 1539 nm were reconstructed by the reflectivity calculation method. Positive index changes were induced in the waveguide layers. The end-face coupling method was used to measure the near-field light intensity distributions at the wavelength of 632.8 nm and the finite-difference beam propagation method was applied to simulate the guided mode profile at the wavelength of 1539 nm. The waveguide structures emerge as candidates for integrated photonic devices.
© 2016 Society of Photo-Optical Instrumentation Engineers (SPIE)
Chun-Xiao Liu, Chun-Xiao Liu, Li-Li Fu, Li-Li Fu, Rui-Lin Zheng, Rui-Lin Zheng, Hai-Tao Guo, Hai-Tao Guo, Zhi-Guang Zhou, Zhi-Guang Zhou, Wei-Nan Li, Wei-Nan Li, She-Bao Lin, She-Bao Lin, Wei Wei, Wei Wei, } "Optical waveguides fabricated by nitrogen ion implantation in fused silica," Optical Engineering 55(2), 027105 (18 February 2016). https://doi.org/10.1117/1.OE.55.2.027105 . Submission:
JOURNAL ARTICLE
5 PAGES


SHARE
Back to Top