19 April 2016 Design of a foveated wide-angle endoscopic lens
Author Affiliations +
Abstract
Recent improvements in optics miniaturization have led to the development of multiple techniques in order to perform minimally invasive endoscopic procedures. Among them, the wide-angle lens is often used for its simplicity and ability to collect a large amount of information in one capture. We report the design and analysis of two versions of a wide-angle endoscope with a full field of view of 180 deg. The difference between the two designs resides in the direct control over distortion that was used in order to achieve foveated imaging. By doing so, the local magnification at the center of the image can be controlled during the design process, allowing for a better resolution in the center of the field of view. The design is also folded in order to address certain issue concerning the region of interest during an endoscopic procedure.
© 2016 Society of Photo-Optical Instrumentation Engineers (SPIE)
Xavier Dallaire, Xavier Dallaire, Simon Thibault, Simon Thibault, } "Design of a foveated wide-angle endoscopic lens," Optical Engineering 55(4), 047106 (19 April 2016). https://doi.org/10.1117/1.OE.55.4.047106 . Submission:
JOURNAL ARTICLE
8 PAGES


SHARE
RELATED CONTENT

Design of compact fisheye lens with slope constrained Q type...
Proceedings of SPIE (September 24 2013)
Optical design of a 10x zoom lens objective for the...
Proceedings of SPIE (December 13 2001)
MWIR zoom with focal extender
Proceedings of SPIE (December 17 2012)
Estimation of surface shape from endoscopic image sequence
Proceedings of SPIE (September 13 1993)

Back to Top