9 August 2016 Glass fiber-reinforced polymer packaged fiber Bragg grating sensors for low-speed weigh-in-motion measurements
Author Affiliations +
Abstract
The weight of rolling trucks on roads is one of the critical factors for the management of road networks due to the continuous increase in truck weight. Weigh-in-motion (WIM) sensors have been widely used for weight enforcement. A three-dimensional glass fiber-reinforced polymer packaged fiber Bragg grating sensor (3-D GFRP-FBG) is introduced for in-pavement WIM measurement at low vehicle passing speed. A sensitivity study shows that the developed sensor is very sensitive to the sensor installation depth and the longitudinal and transverse locations of the wheel loading position. The developed 3-D GFRP-FBG sensor is applicable for most practical pavements with a panel length larger than 6 ft, and it also shows a very good long-term durability. For the three components in 3-D of the developed sensor, the longitudinal component has the highest sensitivity for WIM measurements, followed by the transverse and vertical components. Field testing validated the sensitivity and repeatability of the developed 3-D GFRP-FBG sensor. The developed sensor provides the transportation agency one alternative solution for WIM measurement, which could significantly improve the measurement efficiency and long-term durability.
© 2016 Society of Photo-Optical Instrumentation Engineers (SPIE)
Mu’ath Al-Tarawneh, Mu’ath Al-Tarawneh, Ying Huang, Ying Huang, } "Glass fiber-reinforced polymer packaged fiber Bragg grating sensors for low-speed weigh-in-motion measurements," Optical Engineering 55(8), 086107 (9 August 2016). https://doi.org/10.1117/1.OE.55.8.086107 . Submission:
JOURNAL ARTICLE
12 PAGES


SHARE
Back to Top