26 September 2016 Design of homogeneous laser-line-beam generators
Author Affiliations +
We present a laser beam shaper designed to obtain a homogeneous line beam. A beam shaping system was designed based on cutting and rearranging optics, using two groups of plane parallel plates. The analysis of beam uniformity was performed by use of ray tracing simulation through ZEMAX software and experimental validation. The simulation results show that in the focal plane, a beam width of 1 mm (@95%Imax) and a uniformity of 90.2% are achieved in one direction, and a Gaussian profile with a beam width of 0.06 mm (FWHM) is achieved in the other direction.
© 2016 Society of Photo-Optical Instrumentation Engineers (SPIE)
Huaxin Lin, Huaxin Lin, Hailin Wang, Hailin Wang, Xiao Zhu, Xiao Zhu, Guangzhi Zhu, Guangzhi Zhu, Lijun Qi, Lijun Qi, } "Design of homogeneous laser-line-beam generators," Optical Engineering 55(9), 095106 (26 September 2016). https://doi.org/10.1117/1.OE.55.9.095106 . Submission:


Free-form lens for laser level system
Proceedings of SPIE (August 21 2009)
Flat hat glass diffractive optical beam shaper
Proceedings of SPIE (February 19 2009)

Back to Top