16 November 2017 Maskless beam pen lithography based on integrated microlens array and spatial-filter array
Md. Nazmul Hasan, Duc-Hanh Dinh, Hung-Liang Chien, Yung-Chun Lee
Author Affiliations +
Abstract
A beam pen lithography system is proposed for ultraviolet (UV) patterning of complicated patterns in a maskless manner. The system consists of a single UV light-emitting diode (LED), a double-sided microlens/spatial-filter array (MLSFA), and a motorized x-y stage. The double-sided MLSFA contains a pinhole array sandwiched by two microlens arrays. The microlens arrays are fabricated by an excimer laser micromachining system to achieve accurate and optimized lens profiles obtained from optical simulation. Techniques have been developed in the fabrication processes to guarantee good alignment between the pinhole array and the two microlens arrays. Finally, arrayed UV spots are formed with feature size around 4 to 5  μm. Through mechanical movement of stage and intensity control on the UV LED, a number of complicated patterns are experimentally demonstrated using this type of beam pen lithography. It offers a simple, inexpensive, and portable choice on maskless UV patterning with great potential for future applications.
© 2017 Society of Photo-Optical Instrumentation Engineers (SPIE) 0091-3286/2017/$25.00 © 2017 SPIE
Md. Nazmul Hasan, Duc-Hanh Dinh, Hung-Liang Chien, and Yung-Chun Lee "Maskless beam pen lithography based on integrated microlens array and spatial-filter array," Optical Engineering 56(11), 115104 (16 November 2017). https://doi.org/10.1117/1.OE.56.11.115104
Received: 26 August 2017; Accepted: 3 November 2017; Published: 16 November 2017
Lens.org Logo
CITATIONS
Cited by 7 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Microlens array

Lithography

Ultraviolet radiation

Optical lithography

Microlens

Excimer lasers

Light emitting diodes

Back to Top