21 December 2016 Pulse laser imaging amplifier for advanced Ladar systems
Author Affiliations +
Optical Engineering, 56(3), 031218 (2016). doi:10.1117/1.OE.56.3.031218
Coherent image amplification is an important and difficult task that has a wide range of applications including surveillance, detection, and imaging of biological species. Earlier approaches to achieve a high-gain low-noise coherent amplification were met with little success in regards to gain and image quality. These methods included direct coherent beam propagation through the gain medium with inverted population levels as well as two- and four-beam coupling. This paper discusses a high-gain intracavity laser image amplifier. The approach enables time synchronization of the incoming and amplifying signals with an accuracy 1    ns . Matching the spectrum of the incoming signal to the cavity modes is no longer necessary with this method and is an essential advantage of the amplifier. Instead, the incoming signal is accepted within the spectral band of the amplifier’s gain material. We have gauged experimentally the performance of the amplifier with a 30-dB gain and an angle of view up to 30 mrad.
© 2016 Society of Photo-Optical Instrumentation Engineers (SPIE)
Anatoliy Khizhnyak, Vladimir Markov, Ivan Tomov, David Murrell, "Pulse laser imaging amplifier for advanced Ladar systems," Optical Engineering 56(3), 031218 (21 December 2016). https://doi.org/10.1117/1.OE.56.3.031218 Submission: Received 29 July 2016; Accepted 28 November 2016
Submission: Received 29 July 2016; Accepted 28 November 2016

Optical amplifiers

Imaging systems

Image quality

Laser imaging


Image enhancement



Back to Top